Xiaoyi Feng Yu Machinery Factory, Gongyi City, automatic terrazzo terrazzo tiles are widely used in ground facilities in urban and rural areas, it cost low color and shape can be freely designed, overall good, nice, no radiation, and abrasion resistance, non-slip, anti-aging service life is quite natural stone. In the pursuit of people back to nature, terrazzo machine has become the new darling of the surface decoration. 
 Feature 
 One suitable for terrazzo, marble, polished floor tiles, brick the size of the control in the 300-600MM range. Equipment station, grinding head, automatic conversion station, automatic grinding, feed, group step by step grinding in one coarse, medium, fine and polished work. 3 normally only one person to operate to ensure that the handling of the tiles, stable performance, safe and reliable. 4 smooth surface comparable with marble. (5) the high degree of automation, labor, electricity, labor intensity, site, cost savings are obvious. 6 disposable meet quality requirements, its high production efficiency, terrazzo tiles can help industry to achieve two key production capacity and economic leap. Web site: http://www.gyrcjx.com 
 Terrazzo machine safety operation 
 (1) The operator must wear boots, wear well insulated gloves. 
 (2) terrazzo machine should be in concrete grinding operations to meet the design strength of 70% ~ 80%. 
 (3) before the operations, should be checked and confirmed that the connecting piece fastening, when the crack crisp sound with a mallet tap the grindstone issued before operating. 
 (4) The electrical wiring must be weather-resistant insulating core cord, switches switch button switch, and mounted on the handle of the grindstone machine. The cable should be erected from the ground, not dragging on the ground. Cable should be no damage, good protective ground. 
 (5) terrazzo machine handle must insulating tube, the line adopted by zero protection, the contacts shall not be less than two, and shall install leakage protection (leakage current should not be greater than 15mA, operating time should be less than 0.1s) . 
 (6) power, water, hand pressure to help to make the disc off the ground, and then start the motor. And should be checked to confirm the disc rotation direction and the direction of the arrow, to be operating normally, and then slow down the disc operates. 
 (7) operation, the use of cooling water shall not be interrupted, water consumption should be adjusted to face is not dry. 
 (8) operation, when the disc runout or abnormal sound, should be immediately downtime. Shutdown, you should first upgrade disc after shutdown. 
 (9) replaced with new terrazzo, you should waste terrazzo to pingshang the waste cement products surface grinding 1 ~ 2h, to be the diamond cutting grinding out into the working face operations. 
 (10) grinding blocks must be clamped, and should always check the fixture to avoid the millstone flying out of wounding. 
 (11) operating off the power, cleaning all parts of the mud, placed in a dry place with tarpaulin cover. 
 (12) electrical wiring, switches, etc., must be installed by an electrician and maintenance, and other personnel are not allowed to be free to disconnect.